PS2SDK Working Setup Plus Compilable FMCB and Ulaunchelf Sources and Instructions

[Yeshuachrist]

DEBRANDED FMCB 1.8 + INVISIBLE ICONS

http://www.theisozone.com/downloads/...-18-opl-091-8/

http://rapidshare.com/files/33450147...and%20More.rar

http://www.filefactory.com/file/401u...n_and_More_rar

The 1.8c Source has only been released to beta testers, but it is opensource and intended to be released, so I've made the above with it, especially good for users with modchips, or users with children who do not like the logo design's resemblance to a "common cuss word". If a link is down let me know.

There's a lot of people that would simply like to know how the source is compiled etc. Now, obviously those are untruths and fabrications on that site.

[Helder]

http://forums.sksapps.com/showthread...41&mode=linear

[Yeshuachrist]

Grab It Here

http://rapidshare.com/files/49777878...g%20PS2SDK.rar
http://cloudstor.es/file/Qs_ew/

COMPILING INSTRUCTIONS - SOURCES ARE INCLUDED FMCB 1.75 and Ulaunchelf 4.30

extract "msys" folder, and "MinGW" folder, into your drive C folder, you can use the msys shortcut file to start the compiler, just follow directions below

The Folder called "fmcb" goes into "C:\msys\1.0\local\ps2dev\ps2sdk\samples" (already done - source)
The Folder called "ulf430" goes into "C:\msys\1.0\local\ps2dev\ps2sdk\samples" (already done - source)

double click the "msys" shortcut you put in local disk (c), thats the ps2sdk compiler you see in the black box aka compiler MINGW32:

THESE ARE THE COMMANDS YOU ENTER TO COMPILE FMCB SOURCE:

IN THE MSYS SHORTCUT YOU JUST DOUBLE CLICKED (MINGW32)

type

cd ..

then type

cd local

then type

cd ps2dev

then type

cd ps2sdk

then type

cd samples

then type

cd fmcb (thats the name of the folder you put the source files for fmcb1.75 (fmcb folder name) if folder has diff name use the diff name)

then type

make clean (this command deletes the files that the compiler made when building the source previously, check individual "makefile"'s to see what was included in the files that were built)

then type

make (this will build FMCB1.7 and the .elf will be put in the "bin" folder where the source files are you just compiled, the larger bin is umcompressed, the smaller bin is compressed)


YOU JUST COMPILED FMCB, Now Type

cd ..

now type

cd ulf430 (you will be inside the source folder for ulaunchelf now)

now type

make clean

now type

make (you have just compiled Ulaunchelf 4.30)


FMCB 1.75 and Ulaunchelf 4.30 both work in the ps2 The Ones you just Compiled

Here's a Link to Super Soft Mod 2.0 it uses the INSTALL folder which has additional modules for the FMCB 1.75 ELF you have compiled, but it can work with the FMCB 1.8 or FMCB 1.7 Official INSTALL Packs too.
http://theisozone.com/downloads/play...r-soft-mod-20/