[Request] [PS2] Berserk (SLPM-656.88) Master code

[demilich]

I'm looking for a working Master/Enable code for:
Berserk: Millennium Falcon-hen: Seima Senki no Shou SLPM-65688

Using Mastercode Finder, I found the ones below but are not working with Swap Magic 3.8

9010F350 0C043C7C

90100620 0C0491C8

[lee4]

should be this
F010F350 0000000E

[denben0487]

SwapMagic uses its own encryption. I did some small tests using the example of Resident Evil Code Veronica X SLUS_201.84 (Watch). The codes work, but this option did not work for Berserk. Perhaps the Mastercode should consist of two lines (Watch), which requires a specific encryption key. In general, I did not fully understand...

Why use SwapMagic? There is also CodeBreaker and CheatDevice, which are much simpler in terms of the format of the codes...

[lee4]

SwapMagic uses its own encryption. I did some small tests using the example of Resident Evil Code Veronica X SLUS_201.84 (Watch). The codes work, but this option did not work for Berserk. Perhaps the Mastercode should consist of two lines (Watch), which requires a specific encryption key. In general, I did not fully understand...

Why use SwapMagic? There is also CodeBreaker and CheatDevice, which are much simpler in terms of the format of the codes...

Swap Magic can use RAW format

[denben0487]

Swap Magic can use RAW format

Test...

"Berserk SLPM_656.88"
MasterCode
F0100620 0000000E
Infinite Health
201FACE8 00000000

Work...

[demilich]

@denben0487
Thanks for the Mastercode, that works for Swap Magic.
I'm using Swap Magic since that is the only way I know of to run original NTSC J or PAL region games on a Slim PS2 model without doing any kind of hardmod but also run widecreen codes I'm converting from .pnach files.

[lee4]

Test...

"Berserk SLPM_656.88"
MasterCode
F0100620 0000000E
Infinite Health
201FACE8 00000000

Work...

i have been using / deal with most cheat device software since 1992

[denben0487]

@denben0487
Thanks for the Mastercode, that works for Swap Magic.
I'm using Swap Magic since that is the only way I know of to run original NTSC J or PAL region games on a Slim PS2 model without doing any kind of hardmod but also run widecreen codes I'm converting from .pnach files.

You are welcome. But this is Lee4's merit, he suggested which code format SwapMagic uses...

[denben0487]

Some codes...

"Berserc [NTSC: SLPM_656.88]"
Enable Code (Must Be On)
9010F350 0C043C7C
Infinite Health
201FACE8 00000000
Infinite Rage
201AFEF4 24620000
Infinite Weapons
201AFDB4 24020000
201AFDCC 24020000
201AFDE4 24020000
201AFE08 24020000
Max Expirience
202AEA3C 00000000
202AEC48 24010000
Save Aniwhere (Hold R3~3sec.)
E0020000 003DC350
100D0240 00000000
000D0244 00000000
E0010400 003DC350
30200001 000D0240
E0010030 000D0240
000D0244 00000001
E0040001 000D0244
203CA0C0 00000001
203CA0D4 00000051
203CA0D8 00000027
203CA0DC 00000010

[demilich]

lee4 Thanks for your help with Swap Magic.

denben0487 I will try these additional codes. Thanks

[demilich]

lee4

denben0487

I found a raw code format address to adjust the aspect ratio to widescreen for Berserk.

From

203D2C10 3F4CCCCD

Adjust it to

203D2C10 3F2AAAAB

When I try to convert it with omniconvert from Raw to Action Replay V1 to use in Swap Magic it converts it to

1CACAF38 212C7D40

At this point when I run it on my PS2 slim console it freezes at the Now Loading... Screen
My guess is I need a conditional code so that it skips that loading screen, I've had to use these types of codes before on PS1 console.

Any idea what it could be in Action Replay format, if it supports it at all?

Thanks.

[denben0487]

You can use RAW form of code...

Swap Magic can use RAW format

[demilich]

denben0487

I did try the raw format and ended up with the same result. Freezes at now loading screen.


I'm thinking I need a conditional format of the original address so that it can skip the loading screen and then load the changed address.

Change after the loading screen

203D2C10 3F4CCCCD

to

203D2C10 3F2AAAAB

[denben0487]

Try one of these codes (first in RAW, second in AR1):

16:9 (RAW)
1023979C 3C033F19
102397A4 3463999A

16:9 (AR1)
1CB618C4 2053F0AE
1CB618CC 28734E2F

These are the corrected codes from '9685E636.pnach'. I only tested on an emulator. So you need to check on PS2...


PS: Later I will check the operability of conditional codes in SwapMagic.

[denben0487]

I'm using Swap Magic since that is the only way I know of to run original NTSC J or PAL region games on a Slim PS2 model without doing any kind of hardmod but also run widecreen codes I'm converting from .pnach files.

Have you tried this trick? Source

Store multiple programs in the USB Mass Storage Devices:
1. You can put maximum 4 files in the SWAPMAGIC folder at the
same time. You will need to rename those programs to
SMBOOT0.ELF, SMBOOT1.ELF, SMBOOT2.ELF and
SMBOOT3.ELF respectively.
2. Plug-in the USB Mass Storage Device to the USB port of the
PS2, and then boots your PS2 with CODER disc.
3. After booting up your PS2 with CODER disc, you will see a
“BOOT DISC” window
4. Select “SMBOOT” and you will see another window “LAUNCH
SMBOOT”

I tested (with SwapMagic 3.8.ELF only, not original disc) and this way works ...