[REQUEST] some Genesis level select GG codes

[eadmaster]

These are expecially useful for flashcart owners who cannot use savestates:

• Dynamite Headdy (J) thanks to Tony Hedstrom for the code!
• Trouble Shooter (U) thanks to Tony Hedstrom for the code!
• Battle Mania - Dai Gin Jou (J) thanks to Tony Hedstrom for the code!
• Pulseman (J) thanks to Fkameskies for the code!
• Vectorman thanks to Tony Hedstrom for the code!
• Vectorman 2 thanks to Tony Hedstrom for the code!
• Alisia Dragoon thanks to Tony Hedstrom for the code!
• Earthworm Jim thanks to Tony Hedstrom for the code!
• Earthworm Jim 2 thanks to Tony Hedstrom for the code!
• Ranger X thanks to Tony Hedstrom for the code!
• The Flintstones thanks to Tony Hedstrom for the easier cheat!
• Magical Taruruuto-kun (J) thanks to Tony Hedstrom for the code!
• Super Fantasy Zone (J) thanks to Tony Hedstrom for the code!
• Twinkle Tale (J) thanks to Tony Hedstrom for the code!

[ReyVGM]

I don't understand this thread. Are you requesting someone make level select codes for those games you posted? Or are you going to post the codes yourself, like those RAW codes there?

[eadmaster]

forgot to put the "request" tag in the title, sorry...

[Tony H]

Vectorman (Genesis)

ACZT-AAB6
Press A in the Option menu to go to the Debug screen. The Debug menu lets you increase your health and lives, has level select, and allows you to pick your starting weapon.

[Tony H]

Vectorman (Genesis)

RGXT-A6ZL
Enables all cheats. You only have to press the first button of any built-in game cheat to activate it. Examples: Pause the game and press C for free movement anywhere on the screen, as well as the ability to kill enemies just by touching them. Pause and press A to refill health. Pause and press Left, then unpause to go to Option menu. In Option menu, press A for debug menu.

[Tony H]

Vectorman 2 (Genesis)

AANT-EAEC
Pause the game and press UP for level select screen (when you unpause).

[Tony H]

Giving a few choices on entering the debug menu (level select).

Earthworm Jim (Genesis)


AW6C-JA8T
Pause the game and press any buttons 8 times to enter the debug menu. The debug menu has invincibility, level select, etc.


AG6C-JAFE +
AC6C-JAGN
Pause the game and press Left + A together to enter the debug menu.


AG6C-JAFE +
AC6C-JAGN +
AW6C-JA8T
Pause the game and press any button to enter the debug menu.

[Tony H]

Figured out I could do the "Press any button for Debug menu" with only 2 codes, but too lazy to go back and do the same thing for Earthworm Jim above. :-)

Earthworm Jim 2 (Genesis)

AD5C-JA98 +
PX5W-JGAA
Pause the game and press any button to enter the debug menu. The debug menu has invincibility, level select, etc.

[Flameskies]

Pulseman (Megadrive)
level select enabled in options

RAM FFFD31:00FF

ROM 007F9C:0006

GG A39T-AAE6

it's an improved version that don't require turning cheat off, when use the ROM type don't skip the SEGA logo on startup - if skipped do a soft reset then or enter option screen twice

[Tony H]

Ranger-X (Genesis)


ABRT-AA3C +
AKRT-AA4T
Pause the game and press A for slow motion, or press B to skip to the next level. Press Start to cancel the slow motion and go back to normal speed.

[Tony H]

The first set of codes changes the buttons for level select from "Start + Right + C" on controller 2, to a much easier "A" on controller 1.

Trouble Shooter (Genesis)


JBEA-AAAR +
APEA-BP2T
Press A (on controller 1) at the title screen for level select. Press A again to change level, then press Start to play.


JBEA-AAAR +
APEA-BP2T +
HKFT-B386 +
ABFT-AA9G +
F3FT-B39J
Level select automatically appears at the title screen. Press A to change level, then press Start to play.

[Flameskies]

Taluluto and Pulseman use the same RAM address code to enable level select in options:hint:

[Tony H]

Figured out how to make accessing the Flintstones level select screen easier without using any Game Genie codes.

Every site I checked says to Hold A + B + C + Left, and then press Start to get to the level select screen.

After looking at the assembly, I noticed an easier way is to just hold Left and then press Start.

[eadmaster]

Taluluto and Pulseman use the same RAM address code to enable level select in options:hint:

For Magical Taruruuto-kun i've found this code that enables the map select in the options screen, but apparently it is not effective (you always start from the 1st level):
00B9DC:6610 = CC6T-AN86

(you also need to use the master code CTEA-AA2T)

[Tony H]

For Magical Taruruuto-kun i've found this code that enables the map select in the options screen, but apparently it is not effective (you always start from the 1st level):
00B9DC:6610 = CC6T-AN86

(you also need to use the master code CTEA-AA2T)

I was working on that game last night and noticed the same thing with the first code I made (similar to yours). There is another conditional branch that keeps the correct map/level from loading.

Here are the codes...

Magical Taruruuto-kun (Genesis/MD)

RG6T-A606 +
RENA-A6XJ
Map/Level Select is always available in the Option menu.

-----------

EDIT: Can be done with a single code...

A47A-AABN
Map/Level Select is always available in the Option menu.

-------------

EDIT 2: Don't forget to add your master code to the db.

EDIT 3: I added your master code to the db.