Resident evil 3 GLEP08 pal gc codes not working in Dolphin!

[Luke76bg]

Hi to everyone, i'm here because i'm desperate, no codes for the pal version of resident evil 3 gamecube version seems to work in dolphin, and i don't know why! The codes taken from here, for the multi 5 version, doesn't work! And it's the same version that i have. Someone can help me ? There's a way to convert some codes from the ntsc version that works properly in pal version or is a dolphin problem and is impossible to resolve ? Someone have tried recently this title (pal version) with codes in dolphin and codes was working ? Thanks for the help!

[lee4]

post the codes
you were trying
to use

[Luke76bg]

Ok Lee these are taken from the nintendo section of this site

Infinite Items/Ammo All Slots

PFGZ-JE0H-5W37F
4FC0-JQQA-REC2U
EJE7-U8CY-AXJWM
524V-6N28-X2Z07
ACV2-YK92-Y6G5C
4FMR-EEHV-WPVFW
Z89N-KUR0-8WEHY
AY9B-EZ22-KVK4M
7Z18-GTFH-ME5PM

or this

Infinite Items/Ammo All Slots

W3CU-3KCK-Z3HY8
P417-U8WN-4GK61
8R88-XNWK-CYMGW
V25Q-X3V1-YEAXE
KXYY-JTDC-4URW5
V8QF-5B72-P6MRU
0YG0-73YV-W33E3
GGJG-KRNA-10RH3
317W-XU8N-7XEC5

Infinite Time (Works In Mercenary Mode ONLY)

JRMW-ET5A-GFRMF
3NWD-UAF6 VXFM0

Jill Has Infinite Health

UDTQ-T1VV-EVJ41
JE2W-4956-JYWPY

Jill Has Infinite Health
21ZR-NRAW-YBA00
BKF3-XR9T-6QGJY

Low Finishing Time (Works In Main Game ONLY)

7KE1-29AA-CH5JW
ZU07-3AHM-Q5KEE
2FJV-2BEU-R5206

Walk Through Walls (Press L+R+Z For On; L+R+B For Off)

FG3Z-WD9X-N2WM2
Z9G3-WQ5C-WC4V4
BPZ4-H6N4-V2NHY
KNJZ-16RC-6HAPG
JNGY-00HA-7QE69
XVRT-D2RF-TQRYF
E9FZ-A3QA-YCERP
61Q7-7U1W-GX3AP
YNF6-DZRP-7YCXD
EVAJ-2RYE-UVQNU
XPHA-DDKK-T4K2T
B5HF-747M-Y9K4H
E9FZ-A3QA-YCERP


Zero Saves
YPMA-6FMX-B5F33
GKM3-64GC-UYF0G

Zero Saves

MT1Q-VV8D-X8D7K
HX64-K3CW-5KK52

Unlock Everything
MBV8-XTFU-86JFU
X1PF-2P0T-ZBD1B
6297-8639-KPV6K

Always Make Enhanced Bullets

BW1G-002H-X17HB
J25U-WMQH-NVT04

Mixed Herb

VRPG-93W9-5FY3G
75EE-CU7E-4M9Z6

specifically infinite ammo for all slots it's the most impostant and needed code and obviously doesn't work. I don't know if there is something strange with dolphin and pal games in latest builds but it's very strange. Thanks for the help anyway Lee!

P.s codes for ntsc version work for some strange reason, but i would like to play in my native language if possible!

[lee4]

On official Action Replay site has 3 version try one of them
http://uk.codejunkies.com/search/codes_search_results.aspx?platval=-1&game=resident+evil+3&plat=gamecube

[Luke76bg]

On official Action Replay site has 3 version try one of them
http://uk.codejunkies.com/search/codes_search_results.aspx?platval=-1&game=resident+evil+3&plat=gamecube

i have already tried the codejukies codes, all three of them, nothing!

And this pal to ntsc code instead work perfectly!

04345F38 00000014
04345F40 01CE0028
04345F44 00100280
04345F48 01CE0000

this is taken from dolphin but should be this

PAL2NTSC

0Z9Z-PVZX-M0F36
D50D-9B61-B218X
FAKF-XNQ6-10QF1
1UZF-B7PX-B1AE1
150X-WNRW-URWHC

[lee4]

I dont have answer for your problem

[47iscool]

I dont have answer for your problem

I was going to reply too but when I seen the decrypted codes I didn't see any problem. I mean if it was a codejunkies type 4 code I could understand as Dolphin can't use those but most of these codes are standard write codes.

Maybe there is another PAL version we are unaware of.

Maybe the ISO is just a bad dump. What dumper did you use? I suggest using Cleanrip.

[Luke76bg]

I dont have answer for your problem

Thank anyway for the help Lee! I suppose it's something dolphin related because in the official forum another guy have problem with codes with pal games. In the first 4.0 builds, gecko codes for resident evil 2, for example, they were functioning, now in the latest builds they doesn't work anymore... mah!

[Luke76bg]

I was going to reply too but when I seen the decrypted codes I didn't see any problem. I mean if it was a codejunkies type 4 code I could understand as Dolphin can't use those but most of these codes are standard write codes.

Maybe there is another PAL version we are unaware of.

Maybe the ISO is just a bad dump. What dumper did you use? I suggest using Cleanrip.

Thanks for the answer! But if is a bad iso the game would perfectly working in dolphin anyway ? Because the game works totally fine!

i have the multi 5 version and i suppose that the uk version is the same right ?

[47iscool]

Thanks for the answer! But if is a bad iso the game would perfectly working in dolphin anyway ? Because the game works totally fine!

i have the multi 5 version and i suppose that the uk version is the same right ?

Maybe you should try Dolphin 3.5. It's a little faster than 4, at least with me.

Incorrectly dumped (bad) ISO's may or may not have have issues. You see, GameCube and Wii games have junk data to fill empty space so if the junk data's values were modified it shouldn't cause any problems.

As for your question about both versions being the same, I don't know. There could be more than one then again maybe not.

Other than that I'm not sure I can help you.

[Luke76bg]

Maybe you should try Dolphin 3.5. It's a little faster than 4, at least with me.

Incorrectly dumped (bad) ISO's may or may not have have issues. You see, GameCube and Wii games have junk data to fill empty space so if the junk data's values were modified it shouldn't cause any problems.

As for your question about both versions being the same, I don't know. There could be more than one then again maybe not.

Other than that I'm not sure I can help you.

Thanks for the explanation, sadly resident evil 3 have some serious problem in dolphin 3.5 and the slowndown are very bad, ( but i never tried 64 bit build in 3.5, only 32 bit i must confess) but in the latest build, with full screen option perfomance improvements and other optimizations it's much better, but it's the 64 bit version. Anyway i will try another iso of the game and i really hope that a miracle can happen! I can play in english, it's a not big deal but i would like to play the game in italian, my native language and with some code. Thanks for the help! ^^

[lee4]

try this hp code
http://gamehacking.org/vb/threads/76...1661#post81661

[Luke76bg]

try this hp code
http://gamehacking.org/vb/threads/76...ght=#post80813

Incredible! Something is happening! Game hangs at start and dolphin goes in interpreter mode, the same thing happens with resident evil 2 and gecko codes in the latest build, they cause the same hang on dolphin, but not in older builds where they works. With resident evil 3 pal anyway, never happen with other codes, the game with all other codes tried work perfectly, but the codes simply doesn't work, it hang just with this code! Here a screenshot

Screenshot

[lee4]

what are your settings in config?

[47iscool]

Gecko codes will not work if you input them in the ar codes list. You must do it within the games' ini file. I'll explain:

Go to Dolphin/GameConfig/GLPE08.ini

And make sure you put in lee4's code like so:

[Gecko]
$Infinite Health (Gecko format)
48000000 8025F944
DE000000 80008180
100000AD 000000C8
E0000000 80008000

Also make sure to press enter at the end of the line after inputting the code so it won't delete the first line.