Port request for Metroid Zero Mission from Codebreaker to PAR V3

[Duncan Idaho]

Hello i am trying to use these cheats:

Metroid Zero Mission

Codebreaker_v3 Enabler Code
000071C3 000A
10000968 0007

Codebreaker_v3 WTW
74000130 02EF
E30013E6 001E
74000130 01DF
E30013E6 FFE2

Codebreaker_v3 Press Up+A To Jump Thru Ceilings
74000130 03BE
E30013E8 FFE2

Codebreaker_v3 Fall Thru Floors
74000130 007F
E30013E8 001E

On gba SP UO Kai latest rev i could find on scenebeta, however the CB cannot be loaded because i am using the wrong 'format' (IE if i wanted to load PAR_V3 i would need to write PAR_V3 Fall Thru Floors) and i cannot find the correct format as 'tutorials' that in theory have the format turn out to be for gameshark_V3 and label it codebreaker.

So could any one be so kind to port those codes to the PAR_V3 format? Thanks in advance!.

Oh and the CB codes i got them from here

[lee4]

unfortunately those codes can not be converted and use on gPSP Kai

unfortunately gPSP Kai can use RAM codes only, no codetype supported.

[Duncan Idaho]

unfortunately those codes can not be converted and use on gPSP Kai

unfortunately gPSP Kai can use RAM codes only, no codetype supported.

I found some codes that do the same on the website, getting them to work is tricky, the walk trough walls, and go trough roofs are not working, at least the mega jump is and the instant boost.

And what you mean by codetype?

[Helder]

I made those codes years ago and they do work but there is a button combo if I remember correctly. Lee means that anything that isn't a straight ram code meaning anything that starts with an 8 or 3 isn't really usable on that emulator. If you can use AR3 codes then I could come up with an ASM code that should work but then again I don't know if that emulator will support it either.

[Duncan Idaho]

I made those codes years ago and they do work but there is a button combo if I remember correctly. Lee means that anything that isn't a straight ram code meaning anything that starts with an 8 or 3 isn't really usable on that emulator. If you can use AR3 codes then I could come up with an ASM code that should work but then again I don't know if that emulator will support it either.

A problem i have found is that the codes stored here in the DB arent working, however those found on BSFree are working, i tested the enabler from kenobi that is on the DB and then the version bsfree has and it worked,i did further testing with the DB codes and BSfree codes and they work however they behave oddly, and dont exactly do what they say in the title, the fall trough floors wont refresh the screen, the WTW wont allow me to really walk trough walls either, much like the go trough roof codes, they also dont need the button triggers, as soon as i turn them on they start working.

[lee4]

read this post understand why some codes do work & dont work
https://forum.gamehacking.org/node/119090

[Duncan Idaho]

I see, so i have two alternatives, install Temp AR or get a new gba emulator, suggestions for the latter? Oh and i am using the Uo Kai Test 3 version to be exact.

I was thinking of using gpsp-J a more recent rev of the gpsp line of emulators.

[Helder]

That sounds like the same emulator that I used on the NDS Flash cart DSTWO and it was the same problem, ASM codes didn't work well or at all and only Straight RAM with no jokers worked. TempAR is your best bet as I have used it to hack codes in emulators and it works great.

[Duncan Idaho]

I'll ask around to see how i make TempAR run on gbasp-J (it is a lot better than Kai, despite no cheat support it can actually run Golden sun)

Thanks for all your help @lee4 and @Helder