How to resolve Supply Memory Error in HP Printer

[tech800n]

To resolve the Supply Memory Error. Users should need hard reset the HP Printer.

[Jimmywick]

Lose packaging or protective strips
When you’re about to install a new toner cartridge, there are orange protective strips and plastic clips that are there to make sure the cartridge isn’t damaged whilst being transported. Each of these clips and a protective strip across the drum must be removed before installing your new toner, otherwise, they will prevent your printer from printing

Squashed Metal contacts
For your printer to be able to detect a toner cartridge that has been installed, 2 tiny metal contacts much connect to the corresponding contacts on the cartridge. The metal contacts in the printer, and the ones on the toner complete a circuit and if the contacts aren’t touching. Your printer will think that the toner isn’t installed.


Check the above defect to solve the issue,
Regards,
jimmy Wick

[Nicklaus839]

hey

[William8392]

If you are facing this kind of error you need to remove the power supply and then restart your system. You can reinstall https://www.assignmenthelper.com.au/...elp-australia/ printing drivers to print your stuff. Check for more information.