Announcement

Collapse
No announcement yet.

The 3D Printed Violin That Could Lead To A New Stradivarius

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • The 3D Printed Violin That Could Lead To A New Stradivarius

    By Margaret Rhodes

    This video of Laurent Bernadac, an engineer and lifelong musician, playing the violin looks and sounds very little like a person playing the violin. For one thing, he’s also using a looper and effects pedals to jam out something funkier and jazzier than you’d expect from an instrument more commonly associated with classical and country. But, more ostensibly, Bernadac is playing something that looks more like an avian skeleton than a stringed instrument. It’s like the ghost of a violin.



    It’s a 3Dvarius, a 3-D printed electric violin. It’s based on the renowned Stradivarius violins crafted by the Stradivari family in the late 1600's and early 1700's, but you’d have a hard time sleuthing out the shared DNA between the two machines. It is, as Bernadac says, “a new kind of musical instrument,” one with an algorithmically optimized weight and a digital sound.

    It also may well be a harbinger of what’s to come for musical instruments.

    The High Notes and Low Notes

    3-D printed instruments have similar advantages to 3-D printed automotive parts, or even 3-D printed body parts: if you can design them with algorithms and digitally iterate on them again and again, you can trim excess weight and wind up with something that’s all function before you’ve even created a resin prototype. The 3Dvarius violin, Bernadac says, is optimized as such and lets its player move more freely.


    3Dvarius

    Instruments made from synthetic materials are also more durable. Luis Leguia is the inventor and founder behind Luis and Clark, a Massachusetts company that’s paved the way for carbon fiber cellos and violins. Leguia was a symphony cellist for years and saw the potential for a new material in the early 1990's, while sailing his catamaran alone. Turns out, you hear things when you’re alone. Near the hull, he says, the water swirls around and creates a vortex that emits a low, musical hum when it comes in contact with the fiberglass. With that observation in mind, he later made three prototypes. The carbon fiber design proved better than fiberglass, and he soon started production. After 15 years and some 1,500 instruments, Leguia says he’s had to make just four repairs. Traditional violins and cellos, typically made of spruce and maple, aren’t quite so durable. “In fluctuating climatic conditions—hot, cold, damp, dry—those will sometimes come apart,” Leguia says.

    Still, there are traditions, and the fact Stradivarius instruments are renowned for their sound (even if blind tests and acoustical analysis has found no significant differences between Strads and instruments of comparable quality). For years scientists and luthiers have speculated on what exactly makes a Stradivarius sound like a Stradivarius. The wood has a special resonance, but theories have also bubbled up about the varnish used, or the effect that imperfections and modifications can have on a violin’s sound.

    A few years ago a radiologist in Minnesota decided to run one from 1704 through a CT scan to find out more about the instrument’s anatomy. Each was, like people, unique.


    3Dvarius

    Recreating the acoustics of a Stradivarius violin isn’t as simple as cherry-picking its core components and re-rendering them in software. In a 2013 talk at TEDxAmsterdam, violinist Joanna Wronko tries to prove that by soloing on a 3-D printed model, and then playing her traditional violin. You can hear the difference: the plastic model pales in comparison to the sound of the traditional instrument. Wronko describes the 3-D printed model as “missing a certain vibration.”

    Hybrids are the Future

    While at MIT’s Media Lab in 2011, Amit Zoran and a research team 3-D printed a flute. It was, Zoran admits, a dud. “It’s not a good flute,” he says, “because in order to achieve a new flute you need more than putting the keys in place.” In other words: simply replicating an instrument in another material won’t produce the timber and harmony you’d expect from the Philharmonic. Superlative instruments depend upon the skill of a craftsman, who might spend months on a single instrument. “When we design something with the computer,” Zoran says, “we are losing something of this unique signature.”

    Since then Zoran, now a professor in computer science department at Hebrew University of Jerusalem, has produced a portfolio of other experimental instruments. They all harness emerging technologies—like his guitar with a sensor-laden soundboard—but he’s skeptical of the notion that traditional methods of craft will ebb as digital fabrication takes over. “I’m not sure a fully automatic process controlled by a computer is the holy grail of making instruments,” he says. That, he says, would lead to digitally cloned instruments and the loss of sonic character that makes music, well, music.

    In his Journal of New Music Research report on the 3-D printed flute, Zoran writes, “in traditional musical instrument making, the importance of merging traditional designs and methods with the ability to use new technologies has always been a major theme.” He believes the same is true now, and that engineers and designers should be looking for hybrids. That’s what he did for his Chameleon Guitar design, another MIT-era project, which preserves the wood body of a guitar but incorporates a digital resonator under the guitar bridge. The result, he writes, is a more flexible range of sound than you would typically find in an acoustic guitar.

    Likewise, Bernadac’s 3Dvarius combines a single piece of stereo-lithographic printed plastic with traditional violin strings and tuning pegs adapted from a guitar. It allows for a new kind of sound that Bernadac says he hopes other musicians will experiment with.

    Other Frontiers

    This need for hybridized craft doesn’t necessarily render 3-D printed instruments totally irrelevant. Kelland Thomas is the associate director of the University of Arizona School of Information, a jazz musician, and a recent recipient of a DARPA grant that will fund his work on developing an intelligent computer system that can play an improvised jazz solo. To do that, Thomas needs as much information as possible on what happens in the human brain during musical improvisation. The best way to discern that is through MSRI scans, but you can’t send a person through one of those machines with a metal instrument. A plastic saxophone, however, would work.

    “If we can print a saxophone,” Thomas says, “we could get pictures of [player’s] brains playing music while written down, and then while improvising, to point out different parts of the brain that are activated. We’re just at the beginning of understanding how rich and complex a behavior improvisational is.”

    In a less quantitative way, digitally fabricated machines like the 3Dvarius also can teach musicians and scientists about human creativity. Consider the advent of the Moog synthesizer, and how it took only a few decades to launch an entirely new genre of music. It’s too early to make grandiose proclamations about the 3Dvarius—the fledgling company has one prototype now, and is pursuing production methods—but Bernadac is idealistic about its potential. “I hope violinists will create new sounds and new playing techniques, and a new musical repertoire.”
    Last edited by dlevere; 08-24-2015, 08:20:31 AM.
    The Hackmaster
Working...
X